Cleaning And Drying - GeoMax Zeta125 Manuel De L'utilisateur

6.4 Cleaning and Drying

Basic Cleaning
Cables and plugs
Damp products
Basic cleaning is recommended to ensure proper functionality of the instru-
ment.
• Blow off dust.
• Use only a clean, soft, lint-free cloth for cleaning. If necessary, moisten the
cloth with water or pure alcohol. Other liquids and solvents than water or
alcohol may attack the polymer components.

Only use filtered, oilfree compressed air to blow off dust and for
cleaning purpose.
Keep plugs clean and dry. Blow away any dirt lodged in the plugs of the
connecting cables.
Dry the product, the transport container, the foam inserts and the accessories
at a temperature not greater than 40°C/104°F and clean them. Remove the
battery cover and dry the battery compartment. Do not repack until everything
is dry. Always close the transport container when using in the field.
Care and Transport
Zeta125/ Zeta125s | 67
EN