GeoMax Zeta125 Manuel De L'utilisateur page 41

Warning
messages
Product Overview
Possible warning messages, their reasons and necessary actions are:
Warning message
007168_001
Laser beam flashing
2 x short AND
007169_001
Service
Description To do
Self-levelling Change the tilt of the laser as shown
range exceeded in the display until warning message
disappears. Self levelling starts again
automatically.
Cross axis Move the instrument so that the level
range exceeded vial in the instrument display is in
Example: middle position.
Rotating the Refer to "SETTINGS menu" for infor-
pipe while mation on turning on/off the warning.
working.
Service Display Contact your service centre for
1500 h oper- checking the laser.
ating hours are The instrument can be used unre-
reached. stricted in the meantime.
Zeta125/ Zeta125s | 40
EN