GeoMax Zeta125 Manuel De L'utilisateur page 38

Aligning the laser
line to the target
Press the corresponding arrow key on
the laser or on the remote control.
The beam movement starts slowly and
increases in speed while an arrow key is
pressed.

On the remote control: The
direction of the arrow keys
corresponds to the direction of
the line movement when the
remote control is used from the
target side. If the remote
control is used from the display
side of the laser, the azimuth
direction is opposite the arrow
direction.
Refer to "3.3 Remote Control" for a detailed description of the remote control.
Product Overview
008401_001
Zeta125/ Zeta125s | 37
EN