GeoMax Zeta125 Manuel De L'utilisateur page 19

CAUTION
Labelling
Safety Directions
Potential hazards are not only related to direct beams but also to reflected
beams aimed at reflecting surfaces such as prisms, windows, mirrors, metallic
surfaces, etc.
Precautions:
1) Do not aim at areas that are essentially reflective, such as a mirror, or
which could emit unwanted reflections.
2) Do not look through or beside the optical sight at prisms or reflecting
objects when the laser is switched on, in laser pointer or distance meas-
urement mode. Aiming at prisms is only permitted when looking through
the telescope.
008382_001
Zeta125/ Zeta125s | 18
Type: Zeta125s Manufactured for
GeoMax AG
Art.No.: 829480
CH-9443 Widnau
Power: 10.8V / 2.7A
Made in the USA
S.No.:
acc. to IEC 60825-1:2014 / λ = 620-690nm, P = <1mW, t = 1x10
Complies with FDA performance standards for laser products
except for deviations pursuant to Laser Notice Nr. 50 July 24, 2007
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
EN
-9 s