Changing The Battery - GeoMax Zeta125 Manuel De L'utilisateur

3.1.2 Changing the Battery

Insert and
remove the
battery of the
Zeta125
Product Overview
2
3
008393_001
Step Description
1. Turn off the laser and remove the two screws from the battery pack
with a coin for example. The screws are captive at the battery pack to
avoid losing them.
2. Insert the new battery pack.
3. Pull the screws tight. Otherwise water can come into the battery case
and can damage the battery.

To turn on the Zeta125 after long time storage without battery pack:
Reinsert the battery pack and press the ON/OFF key
mately 3 seconds.
1a
1b
Zeta125/ Zeta125s | 28
for approxi-
EN