Basic Handling; Turning On / Turning Off - GeoMax Zeta125 Manuel De L'utilisateur

5.3 Basic Handling

5.3.1 Turning On / Turning Off

Turning on
Handling
Step Description
2. Remove or change the batteries.
3. Close the battery compartment and pull the screws tight.
To turn on the auto target, press the ON/OFF key
The LED's light up for a second to indicate the remaining battery power. Refer
to LED indicators.
The auto target can be used with three different modes:
• narrow mode: auto alignment with a narrow reception field (+/- 3°),
• wide mode: auto alignment with a wide reception field(+/-6°)
• detector mode
The narrow mode is faster than the wide mode. Align the auto target with
+/-3° to the centre of the auto target.
Auto Target
.
Zeta125/ Zeta125s | 59
EN