GeoMax Zeta125 Manuel De L'utilisateur page 35

Setup prepara-
tion
Product Overview
Step Description
4. Set positive/negative grade. Select and set individual
digits for grade values:
Use the right/left arrow key to select the digit that must
be changed.
Use the up/down arrow key to change the value.
5. Press the Enter key
adjusts to the setting entered.
Use in large diameter or water bearing pipes
Unscrew the standard 150 mm feet extensions and screw on the optional avail-
able base feet extensions.
Use in pipes with 125 mm diameter
Place the laser without metal feet and with
the optional clip-in target plate.
Zeta125/ Zeta125s | 34
to confirm the setting. The laser
008397_001
EN