Synchronisation; Charging The Storage Battery; Fitness Band: Functions And Settings - DS Produkte EP 148 Mode D'emploi

EN

Synchronisation

After you have saved your personal data in the software and entered your workout
goals, you can start your workout and subsequently synchronise the data of the
fitness wristband with the software.
1. Open the file with the ".exe" extension to launch the software.
2. Connect the fitness band to a USB port.
5. The data of the fitness wristband has now been synchronised with the software:
You can now view your performance in the "History" and "Daily performance" tabs.
Once you have reached your entered workout goal (e.g. 2000 steps), another pop-
up window will display this.

Charging the storage battery

The storage battery of the band can be charged via the USB port:
1. Take the cap off of the USB plug.
2. Insert the USB plug in a corresponding USB port on your computer.
3. The storage battery will be automatically recharged as soon as the USB plug is
connected.
4. Hold down button 1 (6) on the fitness band to check the charge status of the storage
battery. The charge status in per cent will be shown on the display.

Fitness band: Functions and settings

Viewing the time/date:
1. Push button 1 (6) on the fitness band once. The current time will appear on the LED
display.
2. Wait until the current date appears on the display.
3. The display will automatically go dark after a few seconds.
14
3. f your computer has recognised the fitness wrist-
band, you will be asked via a pop-up window wheth-
er you would like to read the USB data. Confirm that
you would like to read the data from the USB port.
The data will be synced then.
NOTICE: If the fitness wristband is not recognised
by your computer, the message "Fitness wristband
not recognised" appears on the top right of the
screen. This may be due to the fact that you do not
have administrator rights for the software or for your
computer. You can only save and synchronise data if
you are set up as an administrator!
4. If you are shown another pop-up window with the
synchronisation times for the mobile phone and the
software afterwards, push the "OK" button.