Ultraflex X72 Manuel D'installation page 14

8
Insert the assembly into the dashboard, checking that the flange and threaded pins of the
adjustment system X72 can be correctly inserted into the holes previously drilled
To fix the assembly, thigten the M6 nuts - contained in the device packaging - on the inner wall of
the dashboard, using a 10mm fotk spanner.
9
To adjust the steering wheel, loosen the side knob until it is free to move. Then move the
steering wheel up or down to the desired height and tighten the knob again.
14
page
-
STEERING ADJUSTMENT SYSTEM X72
Installation manual