GE UVC7300 Manuel Du Propriétaire Et Instructions D'installation page 16

STEP 3 RECIRCULATION KIT (If Used)
1. Cut a hole into the soffit for the exhaust duct.
2. Install the vent grill over the exhaust duct.
3. Seal the duct joints with duct tape.
Visit GEAppliances.com to order the optional recirculation kit.
In Canada, vision GEAppliances.ca.
90° Angle Boot
8" to 8" ducting
STEP 4 FINALIZE INSTALLATION
1. Insert filters, see the Filters section.
2. Check operation of the lights and blower.
3. Finish the custom cabinetry.
16
Installation
Hood Center Line
Soffit Cutout
Filters
6-15/16"
9-5/8"
49-2000893 Rev. 0