Device Elements; Start Up; Operation - Kärcher IVR-L 100/24-2 Mode D'emploi

Device elements

Illustration on the inside of the front
cover
1 Guiding rolls with fixed position brake
2 Drain hose
3 Push handle
4 Power cord
5 Suction head
6 ON/OFF switch
7 Suction hose connection
8 Lock
9 Deflector plate
10 Crane point / eye hook
11 Liquid reservoir
12 Accessories compartment
13 Unlocking lever
14 Handle
15 Tilting device
16 Accessories compartment
Illustration on the inside of the front
cover
 Bring the appliance to working position
- secure it, if required, with parking
brakes.
 Ensure that the suction head has been
fitted properly.
Illustration
 Insert the suction hose into the suction
hose connection.
 Attach the desired accessories to the
suction hose.

Operation

Illustration on the inside of the front
cover
 Insert the mains plug into the socket.
Illustration
 Turning on the Appliance
Note: The switch has several switching
stages:
0 Device is switched off
1 Motor 1 switched on
2 Motor 1 and 2 switched on
Always operate the device in stage 2.
12

Start up

ATTENTION
Risk of damage! Always switch the switch-
ing stages quickly in order to prevent dam-
age of the drive motor.
 Start suction process.
Note: When vacuuming up fluids, only im-
merse the accessories half way in order to
deliver sufficient air.
Check the fill level display
Note: The red marking on the drain hose
shows the maximum admissible filling lev-
el.
Empty the liquid container.
 Switch off the appliance and remove
the plug from the socket.
 Drive the appliance to the disposal site
for the liquid.
 Disconnect the drain hose at the upper
hose coupling.
 Hold the drain hose over a suitable col-
lection unit and drain the content.
 Dispose of the contents according to
the local provisions.
– 3
EN