Look 987 Notice D'instructions page 16

Congratulations!
You have chosen a LOOK frame.
We thank you for your trust in our products.
By selecting a new LOOK frame, you have
the benefits of a high technology product, of
French conception.
Your LOOK frame, is identical to one supplied
to major professional cycling teams.
Our products comply with the various
European and international standards in
force.
For the mounting of accessories
we advise you to refer to your dealer.
Before use, please completely read the
instructions, respect the advice given
to experience all aspects of this high
quality product.
LOOK reserves the rights to change the
specifications of the product for any
improvements, without prior notice.
-
Your frame:
Your frame was designed according to the
specifications of the LOOK research and
development department.
The manufacturing of this frame requires a
lot of time and precision. The assembly of the
various parts that make up the carbon frame
is done by gluing or moulding of a single-
piece units.
Your frame is delivered with its integrated
seat post (LOOK patent), headset, the
cable guide under the bottom bracket, the
interchangeable right rear derailleur hanger
and its nut, and the skewer type axle for the
rear wheel.
WARNING: this LOOK frame is designed
and optimised to be used by cyclists not
exceeding 100 kg (220.5 lbs).
EN
17