Safety Instructions; General Safety And Application Information For Lenze Capacitor Modules - Lenze ECSCK Serie Instructions De Montage

1

Safety instructions

General safety and application information
1 Safety instructions
1.1

General safety and application information for Lenze capacitor modules

(according to Low−Voltage Directive 73/23/EWG)
General
During operation, Lenze capacitor modules can include live parts, depending on
their type of protection. Surfaces can be hot.
If the required cover is removed or the modules are used inappropriately or instal-
led or operated incorrectly, severe damage to persons or material can occur.
For more information please see the documentation.
All operations concerning transport, installation, and commissioning as well as
maintenance must be carried out by qualified, skilled personnel (IEC 364 and CENE-
LEC HD 384 or DIN VDE 0100 and IEC report 664 or DIN VDE 0110 and national re-
gulations for the prevention of accidents must be observed).
According to this basic safety information, qualified, skilled personnel are persons
who are familiar with the assembly, installation, commissioning, and operation of
the product and who have the qualifications necessary for their occupation.
Application as directed
Capacitor modules are components which are designed for the installation into
electrical systems or machinery. They are not to be used as domestic appliances,
but only for industrial purposes according to EN 61000−3−2. The documentation
contains information about the compliance with the limit values to EN 61000−3−2.
When installing capacitor modules into machines, commissioning of the drive con-
trollers (i.e. the starting of operation as directed) is prohibited until it is proven that
the machine corresponds to the regulations of the EC Directive 98/37/EG (Machi-
nery Directive); EN 60204 (VDE 0113) must be observed.
Commissioning (i.e. starting of operation as directed) is only allowed when there
is compliance with the EMC Directive (89/336/EEC).
The capacitor modules meet the requirements of the Low−Voltage Directive
73/23/EWG. The harmonised standards of EN 50178 / DIN VDE 0160 apply to the
capacitor modules.
The technical data and information on the connection conditions can be obtained
from the nameplate and the documentation. The instructions must be strictly ob-
served.
Warning: The capacitor modules are products with restricted availability according
to EN 61800−3. These products can cause interferences in residential premises. If
capacitor modules are used in residential premises, corresponding measures are
required.
36
l
EDKCSCK002 DE/EN/FR 1.1