Safety Instructions; General Safety And Application Notes For Lenze Power Supply Modules - Lenze L-force Drives Instructions De Montage

3

Safety instructions

General safety and application notes for Lenze power supply modules

3 Safety instructions
3.1 General safety and application notes for Lenze power supply modules
(according to Low−Voltage Directive 2014/35/EU)
For your pesonal safety
Disregarding the following basic safety measures may lead to severe personal injury and
damage to material assets:
Only use the product as directed.
ƒ
Never commission the product in the event of visible damage.
ƒ
Never commission the product before assembly has been completed.
ƒ
Do not carry out any technical changes on the product.
ƒ
Only use the accessories approved for the product.
ƒ
Only use original spare parts from Lenze.
ƒ
Observe all regulations for the prevention of accidents, directives and laws
ƒ
applicable on site.
Transport, installation, commissioning and maintenance work must only be carried
ƒ
out by qualified personnel.
– IEC 364 and CENELEC HD 384 or DIN VDE 0100 and IEC−Report 664 or
DIN VDE 0110 and national regulations for the prevention of accidents must be
observed.
– According to the basic safety information, qualified, skilled personnel are persons
who are familiar with the assembly, installation, commissioning, and operation of
the product and who have the qualifications necessary for their occupation.
Observe all specifications in this documentation.
ƒ
– This is the condition for safe and trouble−free operation and the achievement of
the specified product features.
– The procedural notes and circuit details described in this documentation are only
proposals. It's up to the user to check whether they can be transferred to the
particular applicationsLenze Automation GmbH does not accept any liability for
the suitability of the procedures and circuit proposals described.
Depending on their type of protection, Lenze power supply modules and
ƒ
corresponding components may include live and moving or rotating parts during
operation. Surfaces can be hot.
– Non−authorised removal of the required cover, inappropriate use, incorrect
installation or operation create the risk of severe injury to persons or damage to
material assets.
– For more information, please see the documentation.
There is a high amount of energy within the power supply module. Therefore always
ƒ
wear personal protective equipment (body protection, headgear, eye protection, ear
protection, hand guard) when working on the live power supply module.
46
l
EDK94ARN24 DE/EN/FR/ES/IT 3.0