English; Safety Notes - Bosch GHG Professional heavy duty 16-50 Notice Originale

OBJ_BUCH-3228-001.book Page 6 Thursday, December 14, 2017 2:55 PM

6 | English

English

Safety Notes

Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
 This heat gun is not intended for
use by children and persons with
physical, sensory or mental limita-
tions or a lack of experience or
knowledge.
This heat gun can be used by chil-
dren aged 8 or older and by per-
sons who have physical, sensory or
mental limitations or a lack of expe-
rience or knowledge if a person re-
sponsible for their safety supervis-
es them or has instructed them in
the safe operation of the heat gun
and they understand the associat-
ed dangers. Otherwise, there is a risk
of operating errors and injuries.

Supervise children during use,
cleaning and maintenance. This will
ensure that children do not play with
the heat gun.

Be careful when working with the
power tool. The power tool produces
intense heat which can lead to in-
creased danger of fire and explosion.
 Exercise special care when working close to inflamma-
ble materials. The hot air jet or the hot nozzle can ignite
dust or gases.
 Do not operate or work with the power tool in areas
where there is danger of explosion.
 Never direct the hot air jet at the same position for long-
er periods. Easily inflammable gases can develop e.g.,
when working plastic, paint, varnish or similar materials.
 Be aware that heat can be conducted to hidden covered
materials and can ignite them.
 Safely place the power tool on the storage surfaces af-
ter use and let it cool completely before packing it
away. The hot nozzle can cause damage.
 Do not leave the switched-on power tool unattended.
1 609 92A 3X4 | (14.12.17)
 Store idle power tools out of the reach of children. Do
not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
 Do not expose the power tool to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
 Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
 Always wear safety goggles. Safety goggles will reduce
the risk of injuries.
 Disconnect the plug from the socket outlet before mak-
ing any adjustments, changing accessories, or placing
the power tool aside. This safety measure prevents unin-
tentional starting of the power tool.
 Check the power tool, cord and plug each time before
use. Do not use the power tool if damage is determined.
Do not open the power tool yourself and have it ser-
viced only by a qualified repair person using only origi-
nal spare parts. Damaged power tools, cords and plugs in-
crease the risk of electric shock.
Provide for good ventilation of your
working place. Gas and vapour developing
during working are often harmful to one's
health.
 Wear safety gloves and do not touch the hot nozzle.
Danger of burning.
 Never direct the hot air jet against persons or animals.
 Do not use the power tool as a hairdryer. The hot air being
blown out is significantly hotter than that from a hairdryer.
 When operating the power tool in damp environments
is unavoidable, use a residual current device (RCD).
The use of a residual current device (RCD) reduces the risk
of an electric shock.
 Never use the machine with a damaged cable. Do not
touch the damaged cable and pull the mains plug when
the cable is damaged while working. Damaged cables in-
crease the risk of an electric shock.
 Do not allow foreign objects to enter the power tool.
 The distance between the nozzle and the workpiece de-
pends on the material you are working on (metal, plas-
tic etc.) and the intended working method. Always test
the amount of air and temperature first.
 Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse
(ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Bosch Power Tools