Accessories; Inserting Racks - Bosch 500 Serie Mode D'emploi

Oven Bottom
The oven bottom conceals the lower heating element. As a
result the element is protected from damage and spills.
Note:
Do not place food directly on the oven bottom.
9 CAUTION
Do not use aluminum foil or protective liners to line
any part of the appliance, especially the oven
bottom. Installation of these liners may result in a
risk of electric shock or fire.

Accessories

Inserting Racks

9 CAUTION
To avoid burns, place oven racks in desired
positions before turning oven on. Always use oven
mitts when the oven is warm. If a rack must be
moved while the oven is hot, do not let oven mitts
contact hot heating elements.
To avoid possible injury or damage to the appliance,
ensure flat rack is installed exactly per installation
instructions and not backwards or upside down.
English 6
Flat Rack
Do not clean in the Self
Clean oven.
Flat Rack
The rack is designed with a stop so it will stop before
coming completely out of the oven and not tilt.
Inserting Flat Rack into Oven:
1. Grasp rack firmly on both sides.
2. Start the rack into the desired oven rack guide position.
3. Tilt the front of the rack up (A) to allow the rear of the
rack to slide under the rack stop (B).
4. Bring the rack to a horizontal position. Push the rack all
the way in. The rack should be straight and flat. It
should not be crooked.
Removing Flat Rack from Oven:
1. Grasp rack firmly on both sides and pull rack toward
you.
2. When the stop is reached, tilt rack up and pull it
completely out of the oven rack guides.