General Technical Data - Burkert 2101 Manuel D'utilisation

Technicaldata
7.5 general technical data
control functions (cf)
Control function A Normally closed by spring action
Control function B Normally open by spring action
Control function I Actuating function via reciprocal
pressurization
actuator sizes ø 50 mm
ø 70 mm
ø 90 mm
ø 130 mm
materials
Body 316L
Actuator PPS and stainless steel
Sealing elements FKM and EPDM
Spindle sealing PTFE V rings with spring compensation
(with silicone grease)
Seat seal PTFE (NBR, EPDM, FKM on request)
Swivel plate
Spindle 1.4401 / 1.4404
Spindle guide
DN10-65 PEEK
DN80-100 1.4401 / 1.4404
Type 2101
connections
Pilot air port Plug-in connector 6/4 mm or 1/4"
others on request
Medium connection Socket: G ½ – G 4 (NPT, RC on request)
Weld end connection: in accordance with
ISO 4200, DIN 11850 R2
other connections on request
media
Control medium Neutral gases, air
Flow media Water, alcohol, fuel, hydraulic liquids,
saline solutions, lye, organic solvents
installation position as required, preferably with actuator in
upright position.
protection class IP67 in accordance with IEC 529 /
EN 60529
english
17