Technical Data - HASE Jena B.11 Mode D'emploi

12. Technical Data

The Jena B.11, certified in compliance with DIN-EN 13240 : 2005 and Art. 15 a
B-VG (Austria), can only be operated when the fire box is closed; more than one
device can be connected to the chimney.
VKF-No.: 18663; Inspection Report No. (A): FSPS-Wa 2073-A
The following data applies to the chimney characteristics in accordance with EN
13384-1 / 2
Combustion Values*
Nominal Thermal Output
CO content at 13% O2
Efficiency
CO content at 13% O2
Waste Gas Mass Flow Rate
Waste Gas Outlet Temp.
Min. Supply Pressure at Nominal Thermal Output
Min. required combustion air volume
*Test bench performance and values
Depending on the insulation of the building, the nominal thermal output of 6 kW indi-
cated on 20 - 80 m² (subject to change).
Dimensions: Height
Stove 115,5 cm
Fire box 38 cm
Steel
Weight 166 kg with ceramic
177 kg with soapstone
Flue pipe diameter
Pipe diameter of Hase ventilation system**
** For separate air supply in low-energy houses and insufficient combustion air supply
in the room where the stove is installed
Wood Briquette
6 6 kW
946 1188 mg/m³
81 81 %
946 1188 mg/m³
5,5 5,5 g/s
290 290 ˚C
12 12 Pa
25 25 m³/h
Width Depth
54 cm 49 cm
28 cm 31,5 cm
Ceramic Soapstone
175 kg 219 kg
15 cm
10 cm
Front view
Top view
54
Side view
7 Ø 21
Connection area for the inst.
of Hase air system below
Dimensions in cm
37