WMF 10 Manuel D'utilisation page 89

Caring for the coffee pad machine.
>
Additionally, clean the steam nozzle once a month (see Chapter "5.4.4 Steam nozzle" on page 32 ff.),
before you reassemble the parts of the milk foamer.
Installing parts after
>
Insert the mixer (4) with the milk foaming nozzle (3) from below until it comes to a stop at the steam
cleaning
outlet (7).
2
>
Attach the milk hose (2) onto the milk hose adapter(3). Push the milk hose up to the edge (3a) on to
the milk hose adapter (3), but not until it comes to a stop.
>
Next, push the handle (1) over the milk hose (2), until it is firmly emplaced on the milk hose adapter (3).
>
Push the handle (1) with the milk hose adapter (3) until it comes to a stop in the opening in the
appliance provided for the purpose.
If you do not correctly assemble the milk foamer, milk and steam will get splashed during foaming and
the milk foaming operation will fail.
3a 3 2 3a 3
stop
GB
30