Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
SPECIFICATIONS
Operating pressure
Dimensions
Length × Height × Width
Weight
Nail capacity
Air consumption
Air inlet
STAPLE SELECTION
Only staples shown in the Table below can be driven with
this Stapler.
Dimensions of staples
16 Gauge
Min.
1.45mm
7.9mm
(.057")
(.309")
ACCESSORIES
Accessories other than those shown below can
lead to malfunction and resulting injuries.
STANDARD ACCESSORIES
1
1 Eye protector
2 Allen wrench for M5 screw
7/16" Crown
Max.
WARNING
2
70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
14 - 3/8" × 10" × 3"
(365 mm × 254 mm × 76 mm)
4.4 lbs. (2.0 kg)
.040 ft
(1.14 ltr/cycle at 6.9 bar)
(1.14 ltr/cycle at 7kgf/cm
3/8" NPT Thread
OPTIONAL ACCESSORIES
Sequential Trip Mechanism Kit (Code No. 876762)
(Single Shot Parts)
Pneumatic Tool Lubricant
.8 oz. (25 cc) oil feeder
4 oz. (120 cc) oil feeder
1 quart (1 ltr) can
NOTE: Accessories are subject to change without any
obligation on the part of HITACHI.
APPLICATIONS
Construction work such as wall sheathing, roof
decking, subflooring.
Mobile and modular home construction.
Making wooden boxes, and expendable pallets.
BEFORE OPERATION
Read section titled "SAFETY" (pages 4 – 6).
Make sure of the followings before operation.
WORKING ENVIRONMENT
No flammable gas, liquid or other flammable
objects at worksite.
Clear the area of children or unauthorized
personnel.
AIR SUPPLY
1
1
Never use oxygen, combustible gases or any other
bottled gases.
— 8 —
2
)
150 Staples
3
/cycle at 100 psi
2
)
... sold separately
(Code No.877153)
(Code No.874042)
(Code No.876212)
WARNING
DANGER
Publicité
Table des Matières
