Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SPECIFICATIONS
Operating pressure
Dimensions
Length × Height × Width
Weight
Staple capacity
Air consumption
STAPLE SELECTION
Be sure to use only the genuine
HITACHI staples for the N5008AC2,
N5010A. The use of any other staples
can result in tool malfunction and/or
staple breakdown, leading to serious
injuries.
Only staples shown in the Table below can
be driven with this Stapler.
Dimensions of staples for N5008AC2
16 Gauge 7/16"
Crown staple
.309"
(7.9 mm)
WARNING
Min.
Max.
.057"
(1.45 mm)
70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
14-3/8" × 10-5/32" × 3"
(365 mm × 258 mm × 76 mm)
4.4 lbs. (2.0 kg)
150 Staples
.040 ft
3
/cycle at 100 psi
(1.1 ltr/cycle at 6.9 bar)
(1.1 ltr/cycle at 7 kgf/cm
Dimensions of staples for N5010A
16 Gauge 1/2"
Crown staple
.386"
(9.8 mm)
ACCESSORIES
Accessories other than those shown
below can lead to malfunction and
resulting injuries.
STANDARD ACCESSORIES
1 Eye protection
2 Allen wrench for M5 screw
— 9 —
English
2
)
2
)
Min.
Max.
.052"
(1.33 mm)
WARNING
2
1
1
1
Publicité
Table des Matières
