Klarstein DELICATESSA 3 Mode D'emploi page 59

Adjust the timer setting as follows:
Model with touch control (figure right):
Use the "+" and "-" buttons to set the timer. Touch and
hold either button to increase or decrease the value
more quickly.
Note: When the timer indicator is flashing, touch
the timer button again to quickly confirm the timer
setting.
Model with touch slider (figure below):
In the timer indicator, the digits of the two-digit minute
3 display can be set individually. First set the units of the
minutes by sliding the slider. Touch the timer button
again. The tens digit is displayed and blinks in the
timer indicator. Now set the tens digit of the minutes by
sliding the slider.
Note: By continuous touching the timer button, the
minutes can be set with the slider in the following
order: "Single Digit - Ten Digit - Confirm Setting -
Single Digit - ...".
When the timer is set, it will begin to count down
immediately, the display will show the remaining time
4
Note: The red dot next to power level indicator
will illuminate for those zones be set with timer. You
can check timer setting of different cooking zone
which set with timer, by touching the corresponding
cooking zone button.
EN
59