Safety Functions - Klarstein DELICATESSA 3 Mode D'emploi

EN
60
Note: If more than one heating zone has timer
4
setting, the timer indicator will show the lowest time.
The red dot next to power level indicator will flash.
When cooking timer expires, the corresponding
5
cooking zone will be switch off automatically.
Notes on Using the Timer
• The default setting of minute reminder and timer is 30 minutes.
• After adjusting, the setting in timer indicator will flash for 5 seconds and then stop
flashing, then the setting will be confirmed.
• The minute reminder and timer can be used at the same time. The timer indicator
shows the lowest time setting. If the lowest setting is minute minder, the red dot next
to the timer indicator will flash. If the lowest setting is timer setting, the red dot of
corresponding cooking zone power level indicator will flash.
•
When the timer display shows the time of the timer with cooking zone selection, you
can display the time of the minute minder by touching the timer button

SAFETY FUNCTIONS

Automatic Detection of Pan and Small Articles (Induction Hobs)
For an induction hob, if the indicator
mean:
• You have not placed a pan on the correct cooking zone.
• The pan you are using is not suitable for induction cooking.
• The pan is too small or not properly centered on the cooking zone.
Notes on automatic pan detection:
1. No heating takes place unless there is a suitable pan on the cooking zone.
2. No heating takes place unless there is a suitable pan on the cooking zone.
flashes alternately with heat setting; this may
.