Appendix; Troubleshooting - Brother P-touch 1400 Mode D'emploi

6
6

Appendix

Troubleshooting

1
The display stays blank after you
have turned on the machine.
2
The machine does not print or the
printed characters are blurred.
3
The text files that you stored in
the memory are no longer there.
4
The printed characters are not
formed properly.
5
A blank horizontal line appears
through the printed label.
6
Striped tape appears.
7
The P-touch has "locked up" (i.e.,
nothing happens when a key is
pressed).
58
Problem Solution
• Check that the AC adapter
(model AD-60/AD-24) is
connected correctly.
• If you are using batteries, check
that they are correctly inserted.
• If the batteries are low, replace
them with new ones.
• Check that the back cover has
been properly attached.
• If the tape cassette is empty,
replace it with a new one.
• If the batteries are low, replace
them with new ones.
• If you are using batteries, they
may have a low charge. Try using
the AC adapter or replace the
batteries with new ones.
• Clean the print head as explained
on Cleaning the print head,
rollers and tape cutter on page 8.
• You have reached the end of the
tape. Replace the tape cassette
with a new one.
• Turn off the P-touch, and then
while holding down g and
R, turn the machine back on.
The machine will be reset. Please
note all the LCD text, formats
and files in memory are erased.
Excluding PF (templates or
images) and database. Use
P-touch Editor Backup Manager.