Formatting The Label; Specifying A Label Length; Specifying A Margin Size - Brother P-touch 1400 Mode D'emploi

☞ Once the
PERSONAL symbol category becomes full
overwrite older ones unless the Symbol Save function is set to OFF
Specifying if the PERSONAL symbol category is continually updated

Formatting the Label

Specifying a label length

The length of the label can be specified as follows.
Press g, then A.
1
Press l or r until LENGTH is displayed.
2
Press u or d until the desired label length is
3
displayed (or use the number keys to type in the
desired setting).
Press n.
4

Specifying a margin size

The size of the margins for the left and right sides of the text can be specified.
Press g, then A.
1
Press l or r until MARGIN is displayed.
2
Press u or d until the desired margin
3
setting is displayed (or use the number keys to
margine type in the desired setting).
Press n.
4
24
, newly selected symbols will
.
(Refer to
on page 40
0.30" to 39.00" (6 to 999 mm)
0.10" to 4.00" (2 to 99 mm)
.
)