Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

1500PC
Model : PT-1500PC
Quick Reference
Guide de référence rapide

Publicité

Chapitres

Table des Matières
loading

Sommaire des Matières pour Brother P-Touch 1500 PC

  • Page 1 1500PC Model : PT-1500PC Quick Reference Guide de référence rapide...
  • Page 3: Quick Reference

    Quick Reference Quick Reference...
  • Page 4 Thank you for purchasing the P-touch 1500PC! With your new Brother label printer, you can print personalized labels for any purpose. Simply insert a label cassette into the PT-1500PC, design your label with the enclosed P-touch label-designing software, and then print it out. Your customized label prints out in seconds. Label tape cassettes are available in various sizes and colors—ideal for color-coded labeling or any other special labeling needs.
  • Page 5: Table Des Matières

    Table of contents Unpacking ..........................2 General description ....................... 2 General precautions ......................2 Inserting a photo into the photo frame .................. 3 Tape cassettes ........................3 Changing the tape caessette ....................4 Connecting the AC adapter ....................4 Power/Feed key ........................5 Connecting the USB interface cable ..................
  • Page 6: Unpacking

    Print head General precautions • Use only Brother TZ tapes with this machine. Do not use tapes that do not have the mark. • Do not pull on the tape being fed from the P-touch. Otherwise, the tape cassette may be damaged.
  • Page 7: Inserting A Photo Into The Photo Frame

    Inserting a photo into the photo frame A photo can be inserted into the photo frame attached to the PT-1500PC, turning it into a decorative addition to your workspace. Insert a photo into the photo frame in either of the following two ways: •...
  • Page 8: Changing The Tape Caessette

    Changing the tape cassette 1 Lift open the tape compartment cover. The installed cassette is also released. Be careful that the photo frame does not fall off when the tape compartment cover is opened. 2 If a tape cassette is already installed, remove it by pulling it straight up.
  • Page 9: Power/Feed Key

    USB interface cable. Software and printer driver Brother Co., Ltd. and its suppliers possess all rights and copyrights to this software (including, but not limited to, the programming, images, clip art, templates, and text incorporated into the soft- ware), the text in the enclosed manuals, and duplicates of the software. This software, either in part or in whole, may not be duplicated, modified, reverse-engineered, disassembled or decompiled without permission.
  • Page 10: For Pc-Compatible Users (Windows 98/98Se/Me/2000)

    ® For PC-compatible users (Windows 98/98SE/Me/2000) Before labels can be printed on the PT-1500PC, label-designing software and the PT-1500PC printer driver must be installed. In order to design labels that can be printed on the PT-1500PC, two applications are available on the enclosed CD-ROM: P-touch Quick Editor and P-touch Editor Ver. 3.1 Before installation Check that your system configuration meets the following requirements.
  • Page 11 To install the P-touch Editor Ver. 3.1 software, 7 Click the Next button to begin installation. click the top button (P-touch Editor) on the 8 After P-touch Quick Editor is installed, a right side. Then, continue with the procedure dialog box appears, allowing you to select in Installing P-touch Editor Ver.
  • Page 12: Installing P-Touch Editor Ver. 3.1

    4 Follow the instructions that appear and Installing P-touch Editor Ver. 3.1 continue with the installation. During installation, the following installation The P-touch Editor Ver. 3.1 software includes a methods will be available. variety of more complex functions for printing barcodes and images, enabling you to design just Typical about any label that you can imagine.
  • Page 13: Installing The Printer Driver

    Continue with the procedure in Installing the printer driver below. If the printer driver is already installed, click the No button. A dialog box appears, showing that installation is finished. 3 Click the Finish button. A dialog box appears, showing that installation is finished. Select “Yes, I want to restart may computer now.”, click the Finish button to restart the computer, and then remove the CD-ROM...
  • Page 14: Uninstalling The Software And Printer Driver

    Uninstalling the software and Replacing, deleting or adding printer driver another printer driver Uninstall the P-touch Editor Ver. 3.1/P-touch Quick 1 Turn off the PT-1500PC, and then disconnect Editor software from a PC as described below. it from the computer. 1 Start up Windows ®...
  • Page 15 PT-1500PCs with the same computer. Click the Finish button. If a dialog box 6 If “Replace with new Brother PT-1500PC” or appears, explaining that the computer should “Add Brother PT-1500PC” was selected: A be restarted, select the option for restarting...
  • Page 16: For Macintosh Users

    For Macintosh users Before labels can be printed on the PT-1500PC, label-designing software and the PT-1500PC printer driver must be installed. In order to design labels that can be printed on the PT-1500PC, two applications are available on the enclosed CD-ROM: P-touch Quick Editor and P-touch Editor Ver. 3.1 Before installation Check that your system configuration meets the following requirements.
  • Page 17 Only the options with a check mark beside 5 Double-click the P-touch Editor 3.1 Installer them are installed. Select the options that icon in the folder. The installer starts up. you wish to install, and then click the Install button to begin installation. In order to print from the PT-1500PC, “PT-1500PC Driver”...
  • Page 18: Selecting The Driver

    8 When the dialog box appears asking if you Reading the User’s Guide wish to restart the computer, click the Restart button to restart the computer. The P-touch Editor User’s Guide can be viewed either by inserting the CD -ROM into the drive each time you wish to refer to it or by installing it onto your hard disk so that it is quickly available at any time.
  • Page 19: Starting Up The P-Touch Editor Ver 3.1 Software

    Starting up the P-touch Editor Ver. 3.1 software Starting up P-touch Editor Ver. 3.1 On a Macintosh computer: • Double-click the P-touch Editor Ver3.1.6 The P-touch Editor Ver. 3.1 application makes it icon in the P-touch Editor Ver3.1 folder easy for anyone to design more complex labels installed on the computer.
  • Page 20: Starting Up The P-Touch Quick Editor Software

    Starting up the P-touch Quick Editor software After P-touch Quick Editor is started, the Starting up P-touch Quick Editor following window is displayed. When P-touch Quick Editor is installed on a Toolbar PC, you can choose to add shortcuts to the desktop, the StartUp menu, and to the Quick Label view Launch toolbar.
  • Page 21: Entering Text

    Entering text Using the Text History list The entire text can quickly be formatted by speci- The 10 most recently printed texts are automati- fying the font, size, style and alignment. In addi- cally stored for future use. tion, a frame can be drawn around the text. 1 Click the Text History button ( ) to 1 Click the arrow beside the Properties button...
  • Page 22: Changing The Background Color

    Mirror Printing: This option allows you to Changing the background color print the text in reverse so it can be attached to a window. The background color of the layout can be changed to suit your preference. Copies: This option allows enter the number •...
  • Page 23: Printing A Label

    Printing a label 1 Turn on the PT-1500PC and start up the computer. 2 Start up either P-touch Quick Editor or P-touch Editor Ver. 3.1, and make sure that the PT-1500PC is selected as the printer. 3 Design your label. 4 Click the [Print] command in the application, select the desired print settings, and then click the Print button.
  • Page 24: Quitting P-Touch Quick Editor

    Quitting P-touch Quick Editor On an IBM PC-compatible computer: • From the application: Right-click in the label view (or text box), and then click [Exit] in the menu that appears. • From the taskbar: Right-click on the P-touch Quick Editor icon in the system tray, at the right of the taskbar, and then click [Exit] in the menu that appears.
  • Page 25: Cleaning The Tape Cutter

    Cleaning the tape cutter Cotton swab After a while, adhesive may accumulate on the cutter, preventing it from cutting or resulting in the Tape cutter tape being jammed. Once a year, use a cotton swab dipped in isopropyl (rubbing) alcohol to clean off the cutter.
  • Page 26: Problem-Solving

    Problem-solving If you think the P-touch is not printing correctly, but you cannot determine the problem with the status indicator, refer to the following list of possible problems, and then perform the necessary operations. Problem Cause Solution Check that the interface cable is correctly The P-touch does •...
  • Page 27: Accessories

    Obtain tape cassettes from your nearest authorized dealer. Brother cannot be held responsible for trouble caused by the use of unauthorized supplies. Use only Brother TZ tapes with this machine. Do not use tapes that do not have the mark.
  • Page 28 Stock No. Description QTY/PACKAGE PRICE 1/4” (6 mm) TZ111 Black Characters on Clear Adhesive $14.99 TZ211 Black Characters on White Adhesive $16.99 TZ315 White Characters on Black Adhesive $20.99 TZS211 Industrial (Strong Adhesive) Black Characters on White Adhesive $19.99 Non-laminated tapes Stock No.
  • Page 29 This order form is provided for your convenience should your retailer not stock the item(s) needed or if you prefer to order by telephone. To order by phone, please call Brother International at 1-800-668- 2768 and have your Visa or MasterCard available.
  • Page 31 This order form is provided for your convenience should your retailer not stock the item(s) needed or if you prefer to order by telephone. To order by phone, please call Brother International at 1-800-668- 2768 and have your Visa or MasterCard available.
  • Page 33 Guide de référence rapide Guide de référence rapide...
  • Page 34 Merci d’avoir acheté la P-touch 1500PC ! Avec votre nouvelle imprimante d’étiquette Brother, vous pourrez imprimer des étiquettes personnali- sées pour n’importe quel usage. Il suffit d’insérer une cassette d’étiquettes dans la PT-1500PC, de conce- voir votre étiquette avec le logiciel de conception d’étiquette P-touch fourni, et de l’imprimer. Votre étiquette personnalisée s’imprime en quelques secondes.
  • Page 35 Table des matières Déballage ............................2 Description générale ......................... 2 Précautions générales ........................2 Insertion d’une photo dans le cadre à photo ..................3 Les cassettes de ruban ........................3 Remplacement de la cassette de ruban ....................4 Raccordement de l’adaptateur secteur ....................4 Touche d’alimentation/avance ......................
  • Page 36: Déballage

    Précautions générales • Utilisez exclusivement des rubans Brother TZ avec cet appareil. N’utilisez pas de rubans ne portant pas le logo • Ne tirez pas sur le ruban qui sort de la P-touch. Vous risqueriez d’endommager le ruban. •...
  • Page 37: Insertion D'une Photo Dans Le Cadre À Photo

    Insertion d’une photo dans le cadre à photo Vous pouvez insérer une photo dans le cadre à photo fixé à la PT-1500PC, ce qui en fait un élément décoratif sur votre lieu de travail. Pour insérer la photo dans le cadre à photo, vous avez deux méthodes au choix : •...
  • Page 38: Remplacement De La Cassette De Ruban

    Remplacement de la cassette de ruban 1 Soulevez le couvercle du logement du ruban pour l’ouvrir. La cassette se dégage également. Faites attention à ce que le cadre à photo ne tombe pas lorsque le couvercle du logement du ruban est ouvert. 2 S’il y a déjà...
  • Page 39: Touche D'alimentation/Avance

    USB. Logiciel et pilote d’imprimante Brother Co., Ltd. et ses fournisseurs détiennent tous les droits et les droits d’auteur de ce logiciel (y compris, mais sans s’y limiter, les programmes, images, clip art, modèles, et textes incorporés dans le logiciel), le texte des manuels fournis et les copies du logiciel.
  • Page 40: Pour Les Utilisateurs D'un Ordinateur Compatible Pc

    Pour les utilisateurs d’un ordinateur compatible PC ® (Windows 98/98SE/Me/2000) Pour pouvoir imprimer des étiquettes sur la PT-1500PC, il faut que le logiciel de conception d’étiquettes et le pilote d’imprimante de la PT-1500PC soient installés. Pour concevoir les étiquettes à imprimer sur la PT-1500PC, vous avez deux applications au choix sur le CD-ROM : P-touch Quick Editor, et P-touch Editor Ver.3.1.
  • Page 41 Pour installer le logiciel P-touch Editor Ver.3.1, 7 Cliquez sur le bouton Suivant pour cliquez sur le bouton du haut (P-touch Editor) sur le commencer l’installation. côté droit. Ensuite, effectuez la procédure de 8 Lorsque P-touch Quick Editor est installé, “Installation de P-touch Editor Ver.3.1”...
  • Page 42: Installation De P-Touch Editor Ver.3.1

    4 Suivez les instructions qui s’affichent et Installation de P-touch Editor Ver.3.1 continuez l’installation. Pour l’installation, vous avez plusieurs méthodes au choix. Le logiciel P-touch Editor Ver.3.1 comprend diver- ses fonctions plus complexes pour impression de Typique code à barres et d’images, ce qui vous permet de Toutes les options de base (P-touch Editor dessiner pratiquement n’importe quel type d’éti- Ver.3.1, Clip Art, Modèles auto formatés, Aide...
  • Page 43: Installation Du Pilote D'imprimante

    Continuez avec la procédure de “Installation 3 Cliquez sur le bouton Terminer. Une boîte de du pilote d’imprimante” ci-dessous. dialogue s’affiche pour vous indiquer que Si le pilote d’imprimante est déjà installé, cliquez l’installation est terminée. sur le bouton Non. Une boîte de dialogue s’affiche pour vous indiquer que l’installation est terminée.
  • Page 44: Désinstallation Du Logiciel Et Du Pilote D'imprimante

    Désinstallation du logiciel et du Remplacement, suppression ou ajout pilote d’imprimante d’un autre pilote d’imprimante Pour désinstaller le logiciel P-touch Editor Ver.3.1/ 1 Mettez la PT-1500PC hors tension, puis P-touch Quick Editor du PC,procédez de la façon débranchez-la de l’ordinateur. suivante.
  • Page 45 5 Sélectionnez l’opération souhaitée, puis Si vous avez sélectionné “Supprimer une cliquez sur le bouton Suivant. Brother PT-1500PC” : Une boîte de dialogue s’affiche pour vous demander de confirmer la S i vous sélectionnez “Remplacer par une suppression de tous les pilotes d’imprimante nouvelle Brother PT-1500PC”, le pilote...
  • Page 46: Pour Les Utilisateurs D'un Macintosh

    Pour les utilisateurs d’un Macintosh Pour pouvoir imprimer des étiquettes sur la PT-1500PC, il faut que le logiciel de conception d’étiquettes et le pilote d’imprimante soient installés. Pour concevoir les étiquettes à imprimer sur la PT-1500PC, vous avez deux applications au choix sur le CD-ROM : P-touch Quick Editor, et P-touch Editor Ver.3.1. Avant l’installation Vérifiez que la configuration de votre système remplit les conditions suivantes.
  • Page 47: Installation De P-Touch Editor Ver.3.1

    3 Insérez le CD-ROM fourni dans le lecteur de CD-ROM de l’ordinateur. Un dossier s’ouvre pour vous permettre de voir le contenu du CD-ROM. Seules les options dont la case est cochée sont 4 Double-cliquez sur le dossier “P-touch Editor installées.
  • Page 48: Sélection De L'imprimante

    Consultation du mode d’emploi Vous pouvez consulter le mode d’emploi de P-touch Editor soit en insérant le CD-ROM dans le lecteur chaque fois que vous souhaitez vous y reporter, soit en l’installant sur le disque dur de façon à pouvoir le consulter à...
  • Page 49: Lancement Du Logiciel P-Touch Editor Ver.3.1

    Lancement du logiciel P-touch Editor Ver.3.1 Lancement de P-touch Editor Ver.3.1 Sur un ordinateur Macintosh : • Double-cliquez sur l’icône P-touch Editor Avec l’application P-touch Editor Ver.3.1, n’im- Ver.3.1.6 dans le dossier P-touch Editor porte qui pourra créer et imprimer des étiquettes Ver3.1 installé...
  • Page 50: Lancement Du Logiciel P-Touch Quick Editor

    Lancement du logiciel P-touch Quick Editor 1 Cliquez sur le bouton Démarrer dans la barre Lancement de P-touch Quick Editor de tâches pour afficher le menu Démarrer. Si vous avez installé P-touch Quick Editor sur 2 Sélectionnez “Programmes”. votre ordinateur, vous pouvez ajouter des 3 Cliquez sur “P-touch Quick Editor”.
  • Page 51: Entrée De Texte

    Entrée de texte Utilisation de la liste d’historique du texte Le texte entier se formate rapidement en spécifiant Les 10 textes imprimés les plus récemment sont la police, la taille, le style et l’alignement. De plus automatiquement enregistrés à des fins d’utilisa- vous pouvez tracer un cadre tout autour du texte.
  • Page 52: Changement De La Couleur Du Fond

    Repères de découpage : Cette option vous Changement de la couleur du fond permet de sélectionner si vous voulez imprimer ou non des repères de découpage Vous pouvez changer la couleur du fond de la page (:), qui indiquent l’endroit où couper en fonction de vos préférences.
  • Page 53: Impression D'une Étiquette

    Impression d’une étiquette 1 Mettez la PT-1500PC sous tension et démarrez l’ordinateur. 2 Démarrez P-touch Quick Editor ou P-touch Editor Ver.3.1, et vérifiez que la PT-1500PC est bien sélectionnée comme imprimante. 3 Concevez l’étiquette. 4 Cliquez sur la commande [Imprimer] dans l’application, sélectionnez les paramètres d’impression, puis cliquez sur le bouton Imprimer.
  • Page 54: Pour Quitter P-Touch Quick Editor

    Pour quitter P-touch Quick Editor Sur un ordinateur compatible IBM PC : • Depuis l’application : Effectuez un clic droit sur la zone d’affichage de l’étiquette (ou la boîte de texte), puis cliquez sur [Quitter] dans le menu qui apparaît. •...
  • Page 55: Nettoyage Du Couteau Du Ruban

    Nettoyage du couteau du ruban Coton-tige Au bout d’un certain temps, des matières adhé- sives risquent de s’accumuler sur le couteau, Couteau du ruban l’empêchant de couper et provoquant des bour- rages du ruban. Une fois par an, nettoyez le cou- teau avec un coton-tige trempé...
  • Page 56: Solution Des Problèmes

    Solution des problèmes Si vous pensez que la P-touch ne fonctionne pas correctement mais que vous n’arrivez pas à déterminer la cause du problème avec l’indicateur d’état, consultez la liste des problèmes possibles ci-dessous, puis effectuez les corrections nécessaires. Problème Cause possible Correction La P-touch...
  • Page 57: Accessoires

    Accessoires • Fournitures Vous pouvez vous procurer des cassettes de ruban auprès de votre revendeur. Brother ne saurait être responsable des anomalies provoquées par l’utilisation de fournitures non agréées. Avec cet appareil, utilisez exclusivement des rubans TZ. N’utilisez pas de rubans ne portant pas le logo °...
  • Page 58 ° de stock Description Qté/Paquet Prix 6 mm (1/4 po) TZ111 Caractères noirs sur ruban clair 14,99$ TZ211 Caractères noirs sur ruban blanc 16,99$ TZ315 Caractères blancs sur ruban noir 20,99$ TZS211 Industriel (à adhérence spéciale) caractères noirs sur ruban blanc 19,99$ Ruban non laminé...
  • Page 59: Bon De Commande Pour Les Accessoires

    Veuillez faire parvenir ce bon de commande à vos clients/concessionnaires dans le cas ou il n’ont pas d’inventaires ou s’ils préfèrent commander par le téléphone. Pour commander par téléphone, appelez Brother International au 1-800-668-2768, et donnez vorte numéro de carte Visa ou MasterCard. Référence...
  • Page 61 Veuillez faire parvenir ce bon de commande à vos clients/concessionnaires dans le cas ou il n’ont pas d’inventaires ou s’ils préfèrent commander par le téléphone. Pour commander par téléphone, appelez Brother International au 1-800-668-2768, et donnez vorte numéro de carte Visa ou MasterCard. Référence...
  • Page 64 Printed in China Imprimé en Chine LA6475001...

Ce manuel est également adapté pour:

Pt-1500pc

Table des Matières