Cleaning; Cleaning The Print Head, Rollers And Tape Cutter - Brother P-touch 1400 Mode D'emploi

Cleaning

Occasionally, certain parts of the P-touch may need to be cleaned. Dust or dirt may
become attached to the P-touch's print head and rollers, particularly when the unit is
used outdoors or in a very dusty environment. With use, the tape cutter may become
covered with adhesive, making it difficult to cut the tape.

Cleaning the print head, rollers and tape cutter

☞ Before cleaning the print head and rollers, press
remove the batteries and disconnect the optional AC adapter.
☞ Be extremely careful not to touch the cutter blades with your fingers.
Print head
Notes on cleaning the print head & rollers
☞ If a blank horizontal streak appears through the label text, clean the machine's print
head.
☞ The print head can be cleaned more easily if the optional print head cleaning cassette
(TZ-CL4) is used.
8
Dry Cotton swab
Tape cutter blades
o
to turn off the P-touch, and then
Tape cutter blades
Dry Cotton swab
Dry cotton swab