Wayscral EVERYWAY E-50 Notice D'utilisation page 57

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
A nut and lock nut system on the brake lever allows you to
adjust the cable tension and therefore the braking force which
will vary over time depending on the wear of the brake pads.
Replacing the brake pads
V-brake
1. Unscrew the pads using a 5mm hex wrench.
2. Place the new pads on the caliper, in the correct direction.
3. Tighten the pads to the correct adjustment (see the previous
chapter).
More
tension
57
EN

Publicité

Table des Matières
loading

Table des Matières