Wayscral EVERYWAY E-50 Notice D'utilisation page 56

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Position the caliper arms vertically and parallel using the correct
cable tension. Once the cable position has been defined,
tighten the cable with the appropriate screw.
Caliper arms
Align the pad with the side of the wheel rim.
Adjust the distance between the pads and the wheel rim, from
1 to 3 mm, to increase the efficiency of the braking.
Move the back of the pad slightly off the wheel rim.
Adjust the symmetry of the calipers by balancing the return
springs of the right and left calipers.
Screw
Driving direction
56
EN

Publicité

Table des Matières
loading

Table des Matières