General Specifications - Klein Tools CL800E Mode D'emploi

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

ENGLISH

Klein Tools CL800E is an automatically ranging true root mean

square (TRMS) digital clamp meter that measures AC/DC current

via the clamp and measures AC/DC voltage, resistance, continuity,

frequency and capacitance. It tests diodes via test leads and

temperature via a thermocouple probe. It also features a Low

impedance (LoZ) mode for identifying and eliminating ghost or

stray voltages.

• Operating altitude: 2000 m

• Relative humidity: <80% non-condensing

• Operating temp: 0°C to 40°C

• Storage temp: -10°C to 60°C

• Accuracy: Values stated at 18°C to 28°C

• Temp coefficient: 0.1 × (quoted accuracy) per °C above 28°C

or below 18°C. Corrections are required when the ambient

working temp is outside the accuracy temp range

• Dimensions: 231 mm × 97 mm × 39 mm

• Weight: 354 g including batteries

• Calibration: Accurate for one year

• Standards: Conforms to: UL STD 61010-1, 61010-2-032

• Pollution degree: 2

• Accuracy: ± (% of reading + number of least significant digits)

• Drop protection: 2m

• Safety rating: CAT IV 600 V, CAT III 1,000 V, Class 2,

CAT III: Measurement category III is applicable to test and

measuring circuits connected to the distribution part of the

building's low-voltage MAINS installation.

CAT IV: Measurement category IV is applicable to test and

measuring circuits connected at the source of the building's

low-voltage MAINS installation.

• Electromagnetic environment: IEC EN 61326-1. This

equipment meets the requirements for use in basic and

controlled electromagnetic environments, such as residential

properties, business premises and light-industrial locations.

Specifications subject to change.