Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Parameter 3: (Entry Time in seconds)
Parameter 4: (Entry Sound)
0: Disable
1: Low
2: High
Parameter 5: (Alarm Length in seconds)
Parameter 6: (Door Chime)
0: Disable
1: Low
2: High
Parameter 7: (Interference)
0: Disable
1: Enable
<
E
X
A
M
P
L
E
:
>
<
E
X
A
M
P
L
E
:
>
To program the following settings:
Exit Time: 30 seconds
Entry Sound: High
Entry Time: 20 seconds
Entry Sound: Low
Alarm Length: 180 seconds
Door Chime: Disable
Interference: Disable
The SMS command will be:
PROG 1234 CFGA:30,2,20,1,180,0,0
<
N
O
T
E
>
<
N
O
T
E
>
Please refer to Programming Mode
for available options for Exit Time,
Entry Time, and Alarm Length setting
Inquire System Configuration
Sending this command will order the Control
Panel to report back its current system
configuration.
SMS Command: CFG?
<
E
X
A
M
P
L
E
:
>
<
E
X
A
M
P
L
E
:
>
To inquire the current system configuration, the
SMS command will be:
PROG 1234 CFG?:
The Control Panel will send back a SMS
message in the following format:
Parameter 1: (Exit Time in seconds)
Parameter 2: (Exit Sound)
20
0: Disable
1: Low
2: High
Parameter 3: (Entry Time in seconds)
Parameter 4: (Entry Sound)
0: Disable
1: Low
2: High
Parameter 5: (Alarm Length in seconds)
Parameter 6: (Door Chime)
0: Disable
1: Low
2: High
Parameter 7: (Interference)
0: Disable
1: Enable
<
E
X
A
M
P
L
E
:
>
<
E
X
A
M
P
L
E
:
>
If the current system settings are as follow:
Exit Time: 30 seconds
Entry Sound: Low
Entry Time: 30 seconds
Entry Sound: Low
Alarm Length: 120 seconds
Door Chime: Low
Interference: Enable
The SMS response message will be:
CFG?:30,1,30,1, 120,1,1
Edit Device
To edit information of learned in devices:
SMS Command: DEVE
Parameter 1: 1~30 (Device Zone Number)
Parameter 2: (Device Attribute)
0: Burglar
1: Home Omit
2: Entry
Parameter
3:
(Device
alphanumeric characters.)
<
N
O
T
E
>
<
N
O
T
E
>
Device attribute value is for Door
Name,
max
10
Publicité
Chapitres
Table des Matières
