Frostmatic Function; Childlock Function; High Temperature Alarm; Door Open Alarm - AEG AGN71200F1 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

22
www.aeg.com
Default temperature:
• -18°C for the freezer
The temperature indicator shows the set
temperature.

3.6 FROSTMATIC function

The FROSTMATIC function accelerates
the freezing of fresh food and, at the
same time, protects foodstuffs already
stored from undesirable warming.
1. Press the Mode button until the
corresponding icon appears.
The FROSTMATIC indicator flashes.
2. Press OK button to confirm.
The FROSTMATIC indicator is shown.

3.7 ChildLock function

Activate the ChildLock function to lock
the buttons from unintentional
operation.
1. Press the Mode button until the
corresponding icon appears.
The ChildLock indicator flashes.
2. Press the OK button to confirm.
The ChildLock indicator is shown.
To deactivate the ChildLock function,
repeat the procedure.
3.8 MinuteMinder function
The MinuteMinder function is to be used
to set an acoustic alarm at the preferred
time, useful for example when a recipe
requires to cool down food products for
a certain length of time or when a
reminder is needed in order not to forget
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
The FROSTMATIC function
stops automatically after
about 52 hours.
To deactivate manually,
repeat the procedure until
the FROSTMATIC indicator
goes off.
The function switches off by
selecting a different freezer
set temperature.
the bottles placed in the freezer for fast
cooling.
1. Press Mode until the corresponding
icon appears.
The MinuteMinder indicator flashes.
The Timer shows the set value (30
minutes) for a few seconds.
2. Press the Timer regulator to change
the Timer set value from 1 to 90
minutes.
3. Press OK to confirm.
The MinuteMinder indicator is shown.
The Timer starts to flash (min).
It is possible to change the time at any
time during the countdown and at the
end by pressing the Temperature colder
button and the Temperature warmer
button.
At the end of the countdown, the
MinuteMinder indicator flashes and an
audible alarm sounds. Press OK to switch
off the sound and terminate the function.
It is possible to deactivate the function at
any time during the countdown by
repeating the function steps, until the
indicator turns off.

3.9 High temperature alarm

An increase in the temperature in the
freezer compartment (for example due to
an earlier power failure) is indicated by:
• flashing of the alarm and freezer
temperature indicators;
• sounding of the buzzer.
Press any button to reset the alarm.
The buzzer switches off.
The freezer temperature indicator shows
the highest temperature reached for a
few seconds. Then show again the set
temperature.
The alarm indicator continues to flash
until the normal conditions are restored.

3.10 Door open alarm

An acoustic alarm will sound if the door
is left open for a few minutes. The door
open alarm conditions are indicated by:
• a flashing Alarm indicator;
• an acoustic buzzer.
When normal conditions are restored
(door closed), the alarm will stop. The

Publicité

Table des Matières
loading

Table des Matières