Mounting The Handles; Ventilation - La Cornue 599 Serie Notice D'installation

Installation Guide

Mounting the handles

To mount the handles onto the door and the drawer operate as follows:
1
Operate as follows:
Insert the two handle spacers onto the supports already available on
the door and the drawer .
1
Screw in the Allen screws available on the handle .
2
2
The screws must be tightened in by means of a 2.5 mm (0,1 in) hex
wrench.

Ventilation

Ventilation is insured by a forced air system through a grille located in
the upper part of the appliance.
This grille should never be covered by panels or any other devices that
could reduce its effi ciency.
17
Ateliers La Cornue· 14 rue du Bois du pont· Z.I Des Béthunes · 95310· Saint Ouen l'Aumône