Free-Standing Installation Single Appliance; Free-Standing Installation Two Or More Appliances - La Cornue 599 Serie Notice D'installation

Building in

Free-standing installation single appliance

Free-standing installation two or
1
3
10
Ateliers La Cornue· 14 rue du Bois du pont· Z.I Des Béthunes · 95310· Saint Ouen l'Aumône
The appliance is ready for a free-standing installation.
Required accessories to be ordered separately:
more appliances
For a built-in installation, to close gaps between the appliance and
the adjacent cabinets, special side profi les and aluminum covering
frames are provided.
Operate as follows:
2
enough space to operate at their back.
as templates, drill 3 mm (0,1 in) holes on the side of the appliance
and fi x the profi les by means of the screws provided.
1
condensation panel to the side of one appliance
fi x on side of the top and lower brackets to one of the appliances and
subsequently to the other
Central connection Kit (KCCMT)
Position the appliances in front of the installation area, leaving
Position the profi les on the appliance facing sides and, using them
Peel off the self adhesive protection and apply the insulated anti-
Move at the back of the appliances to mount the joining brackets:
3
.
2
.
1