La Cornue 599 Serie Notice D'installation page 31

2
2 2
2
1
1 1
1
Adjust the appliance level by means of the front levelling feet
and the rear adjustable wheels.
Operate as follows:
After removing the bottom plinth or grille (it is kept in position by
magnets), adjust the height of the levelling feet
mm (0.6 in) open spanner.
Then adjust the height of the rear wheels by turning the front
adjusting bolts clockwise or anticlockwise as it may be required.
2
Remount the bottom plinth or grille.
Ateliers La Cornue· 14 rue du Bois du pont· Z.I Des Béthunes · 95310· Saint Ouen l'Aumône
Installation Guide
Levelling StandPlus Series
by means of a 17
1
9