Anti-Tipping Safety Assembly - La Cornue 599 Serie Notice D'installation

Anti-tipping safety assembly

1
2
3
To avoid danger of the appliance tipping over
it is mandatory to secure the appliance to the
wall by means of two special brackets.
16
Ateliers La Cornue· 14 rue du Bois du pont· Z.I Des Béthunes · 95310· Saint Ouen l'Aumône
To avoid danger of the appliance tipping over when opening full doors
and drawers, it is mandatory to install two brackets on the upper part
of the appliance for fi xing it securely to the wall.
The brackets should be applied as illustrated using the provided screws
and expansion plugs.
Operate as follows:
Place a bracket on the top of the appliance in correspondence to
the fi xing holes and against the wall
Mark up the holes position on the wall
Drill the wall with an 8 mm (0,3 in) bit and insert the expansion plug
3
.
Reposition the bracket and fi x it fi rst to the cabinet and then to the
wall .
4
.
1
.
2