• Threading The Needle On The Right - ELNA eXtend 264 Livret D'instructions

(A)
(A)
(A)
20
20
20
• Threading the Needle on the Right
Place the spool of thread on the spool pin second from the left.
* The points to thread for needle on the right are marked
in blue.
* A convenient threading chart is placed on the machine
body inside the looper cover.
z Draw the thread through the thread guide second from
the left from back to front: (A)
* If the thread is coming out from the thread guide groove,
If the thread is coming out from the thread guide
If the thread is coming out from the thread guide
If the thread is coming out from the thread guide
pass the thread through the thread guide hole again as
groove, pass the thread through the thread guide
groove, pass the thread through the thread guide
groove, pass the thread through the thread guide
shown: (B)
hole again as shown: (B)
hole again as shown: (B)
hole again as shown: (B)
q Thread guide
(B)
(B)
(B)
x Pass the thread through the holes in the second row
from the left of the thread guide plate as illustrated.
w Thread guide plate
36