Threading The Needle On The Left - ELNA 664 Pro Mode D'emploi

Table des Matières

Publicité

1
2
3
6
4
7
5
8
9
1
(A)
1
2
3
(B)
2
3

Threading the Needle on the Left

Place the spool of thread on the left side spool pin.
* The points to thread for needle on the left are
marked in blue.
* A convenient threading chart is placed on the
machine body inside the looper cover.
1. Draw the thread through the thread guide on the
left from back to front: A
* If the thread is coming out from the thread guide
groove, pass the thread through the thread guide
hole again as shown: B
1
Thread guide
2. After threading the thread guide bar, slip the
thread into the first guide on the machine as
shown.
2
Thread guide
3. Hold the thread at both ends and tug gently to
ensure the thread is correctly inserted between
the tension discs. (If the presser foot lifter is
raised, the thread easily inserts between the
tension discs.)
Left needle thread tension dial
3
62

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

664

Table des Matières