ELNA eXtend 264 Livret D'instructions page 48

3. Insert the thread between tension discs from the
c Insert the thread between tension discs from the right.
3. Insert the thread between tension discs from the
Then pull both sides of thread.
right. Then pull both sides of thread.
right. Then pull both sides of thread.
v Turn the handwheel toward you to bring theneedle bar
4. Turn the handwheel toward you to bring the
4. Turn the handwheel toward you to bring the to its highest position, then pass the thread through
needle bar to its highest position, then pass the
the thread take-up lever cover.
needle bar to its highest position, then pass the
thread through the thread take-up lever cover.
thread through the thread take-up lever cover.
e Left needIe thread tension dial
r Thread take-up lever cover
Left needIe thread tension dial
Left needIe thread tension dial
Thread take-up lever cover
Thread take-up lever cover
5. Pass the thread through the needle thread guide
b Pass the thread through the needle thread guide
5. Pass the thread through the needle thread guide
sliding the thread from right to left.
sliding the thread from right to left.
sliding the thread from right to left.
n Pass it through the needle bar thread guide from left to
6. Pass it through the needle bar thread guide from
6. Pass it through the needle bar thread guide from
right.
left to right.
left to right.
m Thread the left needle from front to back and pull the
thread about 10 cm (4˝) from the eye of the needle to
7. Thread the left needle from front to back and pull
7. Thread the left needle from front to back and pull
the back.
the thread about 10 cm (4˝) from the eye of the
the thread about 10 cm (4˝) from the eye of the
needle to the back.
needle to the back.
t Needle thread guide
y Needle bar thread guide
Needle thread guide
u Left needle
Needle thread guide
Needle bar thread guide
Needle bar thread guide
Left needle
Left needle
– Gently pull all four thread ends towards the
– Gently pull all four thread ends towards the
– Gently pull all four thread ends towards the back of the
back of the machine.
back of the machine.
machine.
– Run threads under the presser foot and lower
– Run threads under the presser foot and lower the
– Run threads under the presser foot and lower
presser foot.
the presser foot.
the presser foot.
– Close side cover and looper cover.
– Close side cover and looper cover.
– Close side cover and looper cover.
– Turn handwheel toward you to chain off three or four
– Turn handwheel toward you to chain off three
stitches.
– Turn handwheel toward you to chain off three
or four stitches.
or four stitches.
The sewing preparation is now complete.
The sewing preparation is now complete.
The sewing preparation is now complete.
42
23
23