Use Of Extension Cords - Wacker Neuson GP2500A Manuel D'utilisation

Operation
4.11

Use of Extension Cords

When a long extension cord is used to connect an appliance or tool to the
generator, a voltage loss occurs—the longer the cord, the greater the voltage loss.
This results in less voltage being supplied to the appliance or tool and increases
the amount of current draw or reduces performance. A heavier cord with a larger
wire size will reduce the voltage loss.
Damaged extension cords can cause electrical shock, resulting in serious injury or
death. DO NOT use worn, bare, or frayed cords. Replace damaged cords
immediately.
Use the chart below as a guide for selecting proper cable size.
Current
(Amps)
2.5
7.5
10
15
20
Use only extension cords rated for outdoor use and equipped with a
third-wire ground.
NOTICE: Operating equipment at low voltage can cause it to overheat.
Load in watts
120V 240V
300
5 600
900
1200
1800
2400
Maximum cable length in feet
#10
600 1000.
1200 500
1800 350
2400 250
3600 150
4800 125
34
#12 #14
600 375
300 200
200 125
150 100
100 65
75 50
wc_tx004573gb.fm
GP
#16
250
125
100
—
—
—