sEctIoN 2
2.1
Description
The PT-26 is a dual gas, water cooled, torch with a 70° or 90° head for manual cutting and gouging and an in-line head for
mechanized cutting and gouging. Each of which is designed for use with certain plasma arc cutting packages. These pack-
ages include the ESP-150, ESP-200 and properly equipped Deuce Pack 150 Systems.
WarNINg
1.60"
(41 mm)
4.01"
(102 mm)
1.66"
(42 mm)
thE plasMa arc cuttINg procEss EMploYs hIgh voltagEs.
coNtact WIth "lIvE" parts of thE torch aND MachINE Must
BE avoIDED. also, thE IMpropEr usE of aNY of thE gasEs EM-
ploYED caN prEsENt a safEtY hazarD. BEforE BEgINNINg op-
EratIoN of thE pt-26 torch, rEfEr to thE safEtY prEcautIoNs
aND opEratINg INstructIoNs pacKED WIth Your poWEr sourcE
pacKagE.
usINg thE torch oN aNY uNIt Not EquIppED WIth a MatINg
safEtY INtErlocK cIrcuIt WIll ExposE opErator to uNExpEct-
ED hIgh voltagE.
1.50"
(38 mm)
figure 2.2 pt-26 Dimensions
13.11"
(333 mm)
103
DEscrIptIoN