Description; Optional Accessories; Ordering Information - ESAB PT-26 Manuel D'instruction

sEctIoN 2
PT-26 Torch
This versatile, easy-to-use 300 amp torch provides superior performance for a full range of manual and mecha-
nized cutting applications.
■ Excellent cutting capability - cuts up to 3-1/2" (88.9 mm)
and severs 4" (101.6 mm) using air, nitrogen or argon-
hydrogen at 300 amps
■ Produces clean, high quality cuts
■ Operates with shop or cylinder air, nitrogen or argon-
hydrogen at 300 amps
■ Compact, lightweight design for ease of handling
■ Long life electrodes lower operating costs
Specifications
Voltage Class "M" (EN 50078)
Current Capacity (All Service Gases and Pressures)
100% duty cycle ..................................................................................200 A DCSP
60% duty cycle, Manual torches, 100% In-line ........................300 A DCSP
Maximum Rated Current .................................................................300 A DCSP
Approved Service Gases
Plasma .............................................................. 0
Shield ................................................................................................. Air, N
Minimum Gas Supply Flow Requirements
Shield ................................................ 200 cfh @ 85 psig (94 l/min. @ 6.0 BAR)
Plasma ............................................240 cfh @ 80 psig (112 l/min. @ 5.6 BAR)
Length of Service Lines .................................. 25 ft.or 50 ft. (7.6 m or 15.2 m)
Weight ..................................................................................... 25 ft. - 16 lbs. (7.3 kg)
Maximum Allowable Inlet Gas Pressure ............................ 100 psig (6.9 BAR)
Start Gas Pressure .........................................................................30 psig (2.1 BAR)
Minimum Coolant Supply Flow Requirements ..............0.9 gpm @ 95 psig
Maximum Coolant Inlet Pressure ........................................ 120 psig (8.3 BAR)
Maximum Coolant Temperature ....................................................105° F (40° C)
Consoles
ESP-150, ESP-200 and DEuCE PaCk 150

Ordering Information

PT-26, 90°, 25 ft. (7.6 m) line .............................................................. 0558004031
PT-26, 90°, 50 ft. (15.2 m) line ........................................................... 0558004032
PT-26, 70°, 25 ft. (7.6 m) line .............................................................. 0558002208
PT-26, 70°, 50 ft. (15.2 m) line ........................................................... 0558002209
, Air, N , H-35, N /H Mixtures
2 2 2 2
, CO , Ar
2 2
50 ft. - 28 lbs. (12.7 kg)
(3.4 l/min @ 6.6 BAR)
■ Pilot arc starting - even starts on paint
■ Gouging nozzle available
■ Intermittent cutting capacity for grate or expanded metal
applications
■ Gouging guard and stand-off guide available for operator
convenience
■ One-year warranty
PT-26, IN-LINE, 25 ft (7.6 m). .............................................................. 0558002320
PT-26, IN-LINE, 50 ft (15.2 m). ........................................................... 0558002321
NOTE: IN-LINE torches have 2" (50.8 mm) barrel diameter and come with-
out rack or torch holder.
PT-26SL, IN-LINE, 17 ft (5.2 m). ......................................................... 0558005620
PT-26SL, IN-LINE, 25 ft (7.6 m). ......................................................... 0558005621
PT-26SL, IN-LINE, 50 ft (15.2 m). ....................................................... 0558005622
NOTE: IN-LINE "SL" torches have 1 3/8" (34.9 mm)barrel diameter and
come with a 32 pitch rack.

Optional accessories

plasmit torch head protector
For gouging ........................................................................................... 0558003797
25 ft. (7.6 m) leather sheath*
Protects torch leads from abrasion and molten metal; particularly
recommended for plasma gouging ............................................. 0558002921
50 ft. (15.2 m) leather sheath* ................................................ 0558002922
spare parts Kit ................................................................................... 0558004030
torch holder, 2" (50.8 mm) ......................................................... 0558002985
torch rigging Kit ............................................................................ 0558003186
*Standard on manual torch.
101

DEscrIptIoN