Air Flow Direction Adjustment; Power Outage - Danby DPA140HEAUBDB Guide D'utilisation Et D'entretien

Operating Instructions

AIR FLOW DIRECTION ADJUSTMENT

Adjust the air fl ow direction automatically (Fig. 4):
- The louver can be adjusted automatically, to change the airfl ow direction. (Fig.4)
- When the power is ON, the louver opens fully.
- Press the SWING button
- The swing feature has 3 positions plus auto, P1, P2, P3 and auto swing.
Please do not adjust the louver manually.
Note: Auto swing means the swing will be continuous.
Note: This function is available on the remote control only.
Fig. 4

POWER OUTAGE

In the case of a power outage, the unit will automatically re-start with the last setting after the power is restored.
Wait 3 minutes before resuming operation
After the unit has stopped, it cannot operate for the fi rst 3 minutes. This is to protect the unit. Operation of the compressor
will automatically start after 3 minutes.
LOCATION
• The air conditioner should be placed on a fi rm foundation to minimize noise and vibration. For safe and secure
positioning, place the unit on a smooth, level fl oor strong enough to support the unit.
• The unit has casters to aid placement, but it should only be rolled on smooth, fl at surfaces. Use caution when rolling
on carpeted surfaces. Use caution and protect fl oors when rolling over wood fl oors. Do not attempt to roll the unit over
objects.
• The unit must be placed within reach of a properly rated grounded
socket.
• Never place any obstacles around the air inlet or outlet of the unit.
• Allow at least 30 cm of space away from the wall for effi cient air
conditioning.
on the remote control to initiate the swing feature.
12