Danby DPA140HEAUBDB Guide D'utilisation Et D'entretien page 10

Operating Instructions
REMOTE CONTROL INSTRUCTIONS
• Use the remote control within a distance of 7 m (23 ft.) from the appliance, pointing it towards the
receiver. Reception is confi rmed by a beep.
2
6
4
8
5
Temp./Timer Display: The temperature setting in
Celcius or Farhenheit, or the timer setting from 0 to 24
hours.
DRY Mode: Dry mode will
display as dh.
MODE Display: Displays the
current selected mode, including
COOL or HEAT.
1. TEMP DOWN Button: Push this button to decrease
the indoor temperature setting by 1°C (1°F) increments.
3
2. TEMP UP Button: Push this button to increase the
indoor temperature setting by 1°C (1°F) increments.
3. M (Mode) Button: Each time the button is pressed, the
operation mode changes in the following sequence:
1
COOL
7
4. Button: Used to stop or start louver movement and
move the airfl ow direction up/down as desired.
5. Button: Unit operation starts when this button is
pressed and stops when the button is pressed again.
6. Button: Used to select the fan speed in 3 steps:
Maximum
Medium
9
Low
7. Button: Activates the Auto-on or Auto-off feature. See
page 10 for details.
8. Button: Select this function if you want the unit to
maintain a comfortable setting and save energy while you
sleep. This function is available on COOL and HEAT mode.
9. Button: Press this button to change from °C to °F.
• With the unit in stand-by, press the "M" button for 20 sec-
onds to change from °C to °F.
DRY
Temperature Symbol: Indicates if
temperature is in °C or °F
TIMER Display: This display area
shows the TIMER settings.
FAN SPEED Display: Displays
the selected fan speed: Maximum,
Medium and Low.
7
FAN HEAT