Danby DPA140HEAUBDB Guide D'utilisation Et D'entretien page 12

Operating Instructions
REMOTE CONTROL INSTRUCTIONS
2
1
1
1
Fan Operation
Ensure the unit is plugged in and has power.
1. Press the M button to select FAN mode (
2. Press the
medium and minimum.
NOTE
In FAN mode, the temperature setting is not displayed and you are
not able to control the room temperature.
Swing Setting
1. Use the
three defl ector positions and the auto swing feature.
Note: Under auto swing, the air fl ow is continuously moving.
Economy (Sleep) Setting
When you press the
ed. The SLEEP function is available in COOL and HEAT modes. The
SLEEP function also dims the display.
When in COOL mode, the temperature setting will increase by 1°C
(1°F) over the next hour and by another 1°C (1°F) over another hour.
This new temperature will be maintained for the next several hours.
When in HEAT mode, the temperature setting will decrease by 1°C
(1°F) over the next hour and by another 1°C (1°F) over another hour.
This new temperature will be maintained for the next several hours.
button to select one of the 3 fan speeds, Maximum,
button to adjust the direction the air blows in. There are
button, the ECONOMY setting will be activat-
9
indicator will appear).