Danby DPA140HEAUBDB Guide D'utilisation Et D'entretien page 11

Operating Instructions
REMOTE CONTROL INSTRUCTIONS
3 2
2
2
1
Cooling Operation
Ensure the unit is plugged in and has power.
1. Press the M button to select COOL mode ( indicator will appear).
2. Use the up and down arrows to select the desired temperature.
The temperature can be set within a range of 18°C (64°F) to 32°C
(90°F) in 1°C (1°F) increments.
3. Press the
medium and minimum.
1
Heating Operation
Ensure the unit is plugged in and has power.
1. Press the M button to select HEAT mode (
2. Use the up and down arrows to select the desired temperature.
The temperature can be set within a range of 13°C (55°F) to 27°C
(81°F) in 1°C (1°F) increments.
3. Press the
medium and minimum.
1
Dehumidifying Setting
Ensure the unit is plugged in and has power. The OPERATION
indicator on the display panel of the unit illuminates.
1. Press the M button until DRY mode is selected ( indicator will
appear).
2. Press the
medium and minimum.
NOTE: You cannot set the temperature in dehumidifying mode.
button to select one of the 3 fan speeds, Maximum,
button to select one of the 3 fan speeds, Maximum,
button to select one of the 3 fan speeds, Maximum,
8
indicator will appear).