show
commit
abort
done
get [prop]
set [prop]
hostname:maintenance system setup dns>
Properties:
hostname:maintenance system setup dns>
hostname:maintenance system setup dns>
hostname:maintenance system setup dns>
hostname:maintenance system setup dns>
aksh: done with "dns", advancing configuration to "ntp" ...
Configurez le protocole NTP (Network Time Protocol) pour synchroniser
4.
l'horloge de l'appareil.
Si vous partagez des systèmes de fichiers à l'aide de SMB et d'Active Directory,
Remarque -
les horloges du client doivent être synchronisées à cinq minutes près avec l'horloge de l'appareil
afin d'éviter les erreurs d'authentification d'utilisateur. Pour garantir la synchronisation de
l'horloge, vous pouvez notamment configurer l'appareil et les clients SMB pour qu'ils utilisent
le même serveur NTP.
Pour obtenir des informations détaillées, reportez-vous à la section
manuel Guide d'administration des systèmes Oracle ZFS Storage Appliance, version
Configure Time. Configure the Network Time Protocol.
Subcommands that are valid in this context:
help [topic]
=> Show information pertinent to the current context
=> Commit current state, including any changes
=> Abort this task (potentially resulting in a
misconfigured system)
=> Finish operating on "dns"
=> Get value for property [prop]. ("help properties"
for valid properties.) If [prop] is not specified,
returns values for all properties.
=> Set property [prop] to [value]. ("help properties"
for valid properties.) For properties taking list
values, [value] should be a comma-separated list of
values.
show
<status> = online
domain = sun.com
servers = 198.51.100.1
set domain=sf.fishworks.com
domain = sf.fishworks.com (uncommitted)
set servers=198.51.100.2
servers = 198.51.100.2 (uncommitted)
commit
done
=> Get context-sensitive help. If [topic] is specified,
it must be one of "builtins", "commands", "general",
"help", "script" or "properties".
Exécution de la configuration initiale (CLI)
"Configuration NTP" du
Première configuration de l'appareil
OS8.6.0.
151