Myq® App Control; Connect With Your Smartphone - Chamberlain C253 Guide De L'utilisateur

myQ ® App Control

Connect With Your Smartphone

You will need:
Wi-Fi enabled smartphone or tablet
l
Broadband Internet connection
l
Wi-Fi signal in the garage (2.4 GHz, 802.11b/g/n required)
l
Password for your home network (router's main account, not guest network)
l
myQ ® serial number located on the garage door opener, see page 2
l
Check Wi-Fi Signal Strength
Make sure your mobile device is connected to your Wi-Fi network. Hold your mobile device by the garage door
opener and check the Wi-Fi signal strength.
If you see:
Wi-Fi signal is strong. You're all set!
Wi-Fi signal is weak.
The garage door opener will likely connect to your Wi-Fi network. If not, try one of the
options below.
No Wi-Fi signal. Try one of the following:
Move your router closer to the garage door opener to minimize interference from
l
walls and other objects
Buy a Wi-Fi range extender
l
®
Download the myQ App to Set Up an Account and Connect
Open and close your door, get alerts and set schedules from anywhere. Connected smart garage door openers also
receive software updates to ensure the opener has the latest operational features.
1. Download the myQ ® App.
2. Set up an account and connect.
For more information on connecting your garage door opener, visit support.chamberlaingroup.com.
Wi-Fi Status
LED Definition
Blue Off - Wi-Fi is not turned on.
Blinking - Garage door opener is in Wi-Fi learn mode.
Solid - Mobile device connected to the garage door opener.
Blue and Green Blinking - Attempting to connect to router.
Green Blinking - Attempting to connect to the Internet server.
Solid - Wi-Fi has been set up and garage door opener is connected to the internet.
NOTES:
myQ ® App control WILL NOT work if the garage door opener is operating on battery power.
To erase the Wi-Fi settings, see page 19.
3
LED
An LED on the garage door
opener will indicate Wi-Fi
status. See table below.