ECOVACS ROBOTICS DEEBOT M82 Manuel D'instructions page 14

3. Operating and Programming
3 Edge Cleaning Mode
This mode is good for cleaning the edges and
corners of a room. In Edge Cleaning Mode,
5 Single Room Mode
This mode is used if DM82 only needs to
clean a single room. Press the AUTO Mode
Button on the robot twice or the START/
PAUSE Button on the Remote Control
twice, DM82 starts to clean in Single Room
Mode, stops and beeps when and where it
completes cleaning.
* The room must be contained for Single Room
Mode to function properly. Close doors to the
room entrance and exit to contain the room.
12
EN
4 MAX Cleaning Mode
This mode is used to increase the suction
power of any other cleaning mode already
in process. Begin cleaning in the desired
cleaning mode, then press the MAX button
to increase suction power for deep cleaning.
6 Return to Charger Mode
When battery power gets low, DM82
automatically switches to Return to Charger
Mode and returns to the Charging Dock to
recharge itself.
* DM82 can also be sent back to the
Charging Dock at any time by pressing
the Return to Charger Button on the
Remote Control.