Riester ri-former RPT-100 Mode D'emploi page 29

Important information regarding Electro Magnetic Compatibility (EMC)
The ri-former® Predictive Thermometer RPT-100 needs special precautions
regarding EMC and should be put into service according to the EMC information
provided in the user manual and other documents; ri-former® Predictive Ther-
mometer RPT-100 conforms to this EN 60601-1-2:2007+AC:2010/IEC 60601-1-
2:2007 standard for both immunity and emissions.
Nevertheless, special precautions need to be observed:
• The use of accessories and cables other than those specified, with the
exception of accessories and cables sold by MediWorks of ri-former®
Predictive Thermometer RPT-100 as replacement parts for internal
components, may result in increased EMISSIONS or decreased IMMUNITY
or decreased LIFESPAN of the ri-former® Predictive Thermometer
RPT-100.
• The ri-former® Predictive Thermometer RPT-100 should not be used
adjacent to or stacked with other equipment. In case adjacent or stacked
use is necessary, the ri-former® Predictive Thermometer RPT-100 should
be observed to verify normal operation in the configuration in which it will be
used.
12. Accessories
Art. No. 12688 Probe cover 500 pcs (25 x 20 pcs)
Art. No. 12668 Probe RED rectal (2,7m)
Art. No. 12669 Probe BLUE oral / axillary (2,7m)
WARRANTY
This product has been manufactured under the strictest quality standards and
has undergone a thorough final quality check before leaving our factory. We are
therefore pleased to be able to provide a warranty of 2 years from the date of
purchase on all defects, which can verifiably be shown to be due to material or
manufacturing faults. A warranty claim does not apply in the case of improper
handling. All defective parts of the product will be replaced or repaired free of
charge within the warranty period. This does not apply to wearing parts. For
R1 shock-proof, we grant an additional warranty of 5 years for the calibration,
which is required by CE-certification. A warranty claim can only be granted
if the Warranty Card has been completed and stamped by the dealer and is
enclosed with the product. Please remember that all warranty claims have to
be made during the warranty period. We will, of course, be pleased to carry out
checks or repairs after expiry of the warranty period at a charge. You are also
welcome to request a provisional cost estimate from us free of charge. In case
of a warranty claim or repair, please return the Riester product with the com-
pleted warranty card to the following address:
Rudolf Riester GmbH
Dept. Repairs RR
Bruckstr. 31
D-72417 Jungingen
Germany
29